All data on the phone secure because the data is lost when flashing!
Battery should be fully charged
Samsung USB drivers must be installed. (available after gravel installation)
desired firmware package must be available (find links to her here in the forum) to be
Flashing a four-part firmware:
In the extract firmware folder must 4 files are (boat, PDA, Modem, CSC)
When totoro_0623.pit is already in the firmware you need not download these
Overview Download the firmware you want from
Load the "Odin3 v1.87.exe" starts Odin3 v1.87.exe (Win7 as admin).
Installing the files:
PIT = "totoro_0623.pit"
BOOTLOADER = "BOOT_xxx.tar.md5"
PDA = "PDA_xxx tar.md5"
PHONE = "MODEM_xxx tar.md5"
CSC = "GT-S5830i MULTI CSC_xxx tar.md5"
Here we go:
BATTERY Remove + SIM + SD card!
Only ACCU reinsert
VOLUME DOWN + VOLUME UP + POWER press simultaneously.
Well then have to confirm that you would like to install a custom OS (VOLUMR UP), then you're in ODIN MODE
Connect your phone to the PC via USB
OdinMultiDownloader must be active gravel (if installed) must be inactive.
Wait until both drivers are installed completely.
Now a light yellow box with a COM port
Press start and begin the flash process should.
During the flash process, not on the mobile phone, PC, or play around with cables!
When the field turns blue and "PASS" is to see the S5830i restart and the USB cable can be removed
Switch off the phone (Power On / Off button)
SIM and SD card reinsert
Phone on (power on / off button)
Samsung USB Drivers: http://hotfile.com/dl/133929348/9107244/SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip.html